Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 132 of 1178

TM 9-2320-366-34-3 15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT) NOTE Steps (64) and (65) require the aid of an assistant. (64) Disengage pivot arm (104) and spacer (105) from cab tilt cylinder mounting bolt (101). (65) Remove self-locking nut (102), cab tilt cylinder mounting bolt (101) and cab tilt cylinder (106) from bracket (107). WARNING Standard cab weighs approximately 1400 lbs (636 kgs). M1093/M1094 cab weighs approximately 1700 lbs (772 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. CAUTION Use spreader bar and place sheet rubber on cargo sling to prevent damage to cab roof. Failure to comply may result in damage to equipment. NOTE Steps (66) through (72) require the aid of two assistants. (66) Lower cab door windows and install cargo sling through rear section of cab doors (108). 15-70