TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 118 of 1178
TM 9-2320-366-34-3 15-2. CAB REPLACEMENT (CONT) NOTE Perform step (52) on M1084, M1086, M1090, and M1094. (52) Route crane/dump power cable assembly (76) inside dashboard (83). NOTE Perform step (53) on vehicles equipped with PTO. (53) Route PTO cable assembly (77) inside dashboard (83). (54) Position power distribution panel 24 vdc cable (78), power distribution panel 12 vdc cable (79), rear lights cable assembly (80), and front lights cable assembly (81) in dashboard (83). NOTE Steps (55) and (56) require the aid of an assistant. (55) Position start and charging cable assembly (84), engine control cable assembly (85), and grommet (86) in cab (2). (56) Position vacuum hose (87) in cab (2). (57) Connect connector P119 (88) to connector J119 (89). NOTE Install plastic cable ties as required. (58) Position start and charging cable assembly (84) and engine control cable assembly (85) in dashboard (83). (59) Position vacuum hose (87) in dashboard (83). 15-56 Change 1