TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 107 of 1178
TM 9-2320-366-34-3 WARNING Brace cab with cab support tool before installing locking arm, spacer, washer, and cotter pin on tilt cylinder mounting bolt. Failure to comply may result in serious injury or death to personnel. (22) Raise cab enough to install cab support tool on engine rear lifting eye (20) (TM 9-2320-366-10-1). WARNING After cab is lowered on cab support tool, return cab tilt selector knob to the RAISE position for added safety. Failure to comply may result in injury to personnel. (23) Lower cab on cab support tool (TM 9-2320-366-10-1). CAUTION Do not allow cab latch to change position while tightening screws. Failure to comply may result in damage to equipment. (23.1) Tighten two screws (20.1) to 34-44 lb-ft (44-60 N·m). Change 1 15-48.1/(15-48.2 Blank)