TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 106 of 1178
TM 9-2320-366-34-3 15-2. CAB REPLACEMENT (CONT) CAUTION Align arrow on top of tilt cylinder to point toward front of cab. Failure to comply may result in damage to equipment. (18) Position cab tilt cylinder (16) in tilt cylinder mounting bracket (17). (19) Position cab tilt cylinder mounting bolt (18) in tilt cylinder mounting bracket (17) and tilt cylinder (16) with self- locking nut (19). (20) Tighten self-locking nut (19) to 180-232 lb-ft (244-315 N·m). (21) Remove spreader bar, cargo sling and rubber sheet from cab (2). CAUTION Cab latch must be adjusted so that it rides squarely on the latch support and does not contact the welded area of the latch support. Failure to comply may result in damage to equipment. (21.1) Adjust cab latch (19.1) on latch supports (19.2). 15-48 Change 1