TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 999 of 1434
TM 9-2320-366-34-2 b. Installation. WARNING Subframe rail weighs approximately 200 lbs (91 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (1) requires the aid of two assistants. (1) Position subframe rail (1) on vehicle. NOTE • Left and right side subframe rails are installed the same way. Right side shown. • Steps (2) through (9) require the aid of an assistant. (2) Position three bolts (2) and self-locking nuts (3) in bracket (4). (3) Tighten three self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). CAUTION Ensure subframe rail flange is fully in contact with main frame rail flange. Failure to comply may result in damage to equipment. (4) Position two bolts (5) and self-locking nuts (6) in rear support brace (7). (5) Tighten two self-locking nuts (6) to 210-225 lb-ft (285- 305 N·m). (6) Position two bolts (8) and self-locking nuts (9) in bracket (10). (7) Tighten two self-locking nuts (9) to 210-225 lb-ft (285- 305 N·m). 13-339