TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 997 of 1434
TM 9-2320-366-34-2 Change 2 13-337 13-34. M1093 SUBFRAME RAIL REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission auxiliary oil cooler removed (TM 9-2320- 366-20-4). M1093 Parachute suspension removed (para 13-4). Tool box removed (TM 9-2320-366-20-4). Hydraulic manifold removed (TM 9-2320-366-20-5). Fuel tank removed (TM 9-2320-366-20-3). Hydraulic reservoir removed, if equipped (TM 9-2320- 366-20-5). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Tools and Special Tools (Cont) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Socket Set, Impact (Item 58, Appendix B) Materials/Parts Nut, Self-locking (11) (Item 211, Appendix F) Bolt (5) (Item 7, Appendix F) Personnel (3) a. Removal. (1) Remove four self-locking nuts (1) and bolts (2) from front lifting bracket (3). Discard self-locking nuts. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE Left and right side subframe rails are removed the same way. Right side shown. Steps (1) through (4) require the aid of an assistant.