TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 994 of 1434

TM 9-2320-366-34-2 13-33. M1083 SUBFRAME RAIL REPLACEMENT (CONT) b. Installation. WARNING Subframe rail weighs approximately 200 lbs (91 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Step (1) requires the aid of two assistants. • Left and right side subframe rails are installed the same way. Right side shown. (1) Position subframe rail (1) on vehicle. CAUTION Ensure subframe rail flange is fully in contact with main frame rail flange. Failure to comply may result in damage to equipment. NOTE Steps (2) through (9) require the aid of an assistant. (2) Position ten bolts (2) and self-locking nuts (3) in frame plate (4). (3) Tighten ten self-locking nuts (3) to 210-225 lb-ft (285-305 N·m). 13-334