TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 965 of 1434
TM 9-2320-366-34-2 13-31. M1089 FRAME RAIL REPLACEMENT (CONT) INITIAL SETUP (CONT) Materials/Parts Nut, Self-locking (2) (Item 208, Appendix F) (LH side) Nut, Self-locking (6) (Item 214, Appendix F) (LH side) Nut, Self-locking (4) (Item 214, Appendix F) (RH side) Nut, Self-locking (2) (Item 202, Appendix F) (LH side) Nut, Self-locking (Item 202, Appendix F) (RH side) Bolt (Item 10, Appendix F) Bolt (4) (Item 7, Appendix F) Materials/Parts (Cont) Bolt (2) (Item 17, Appendix F) (LH side) Bolt (4) (Item 17, Appendix F) (RH side) Bolt (4) (Item 18, Appendix F) Bolt (2) (Item 19, Appendix F) Nut, Self-locking (19) (Item 211, Appendix F) (LH side) Nut, Self-locking (21) (Item 211, Appendix F) (RH side) Bolt (6) (Item 16, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. LH Removal. (1) Remove six self-locking nuts (1), bolts (2), and clamps (3) from frame rail (4). Discard self-locking nuts. (2) Remove two self-locking nuts (5), bolts (6), and clamps (7) from frame rail (4). Discard self-locking nuts. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE Steps (3) through (10) require the aid of an assistant. (3) Remove collar (8), bolt (9), and bracket (10) from frame rail (4). Discard collar and bolt. 13-305