TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 96 of 1434
TM 9-2320-366-34-2 3-3. ENGINE ASSEMBLY REPLACEMENT (CONT) (125) Remove two screws (212), washers (213), and alternator bracket (214) from support bracket (211). b. Installation. NOTE Perform steps (1) through (6), on removed engine, on vehicles equipped with 200 Amp alternator. (1) Position alternator bracket (1) on support bracket (2) with two washers (3) and screws (4). (2) Tighten two screws (4) to 18-22 lb-ft (24-30 N·m). 3-34 Change 1