TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 95 of 1434
TM 9-2320-366-34-2 NOTE Perform step (121) on vehicles serial number 1478 and higher. (121) Remove eight bolts (196), plate (197), three flexplates (198), and flexplate assembly (201) from hub adapter (200). (122) Remove hub adapter (200) from crankshaft (202). (122.1) Remove fitting (174.2) from flywheel housing (168). NOTE Replacement engines are equipped with 100 amp alternators. Perform steps (123) through (125) on vehicles equipped with 200 Amp alternator. (123) Remove self-locking nut (203), spacer (204), screw (205), and washer (206) from alternator (110). Discard self-locking nut. WARNING Alternator weighs approximately 50 lbs (23 kgs). The aid of an assistant is required to remove alternator. Failure to comply may result in injury to personnel. NOTE Step (124) requires the aid of an assistant. (124) Remove nut (207), washer (208), screw (209), washer (210), and alternator (110) from support bracket (211). Change 1 3-33