TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 90 of 1434
TM 9-2320-366-34-2 3-3. ENGINE ASSEMBLY REPLACEMENT (CONT) NOTE Perform steps (99) through (100.1) on vehicle serial number 1478 and higher. (99) Remove plug (171) from flywheel housing (168). NOTE • Step (100) requires the aid of an assistant. • During removal of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. (100) Remove six bolts (172) from flexplate (170). (100.1) Install plug (171) in flywheel housing (168). WARNING Position floor jack under transmission control valve module for support. Failure to comply may result in injury to personnel or damage to equipment. (101) Remove 12 bolts (173) and washers (174) from flywheel housing (168). (101.1) Disconnect hose (174.1) from fitting (174.2). 3-28 Change 1