TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 853 of 1434
TM 9-2320-366-34-2 13-24. M1083 FRAME RAIL REPLACEMENT (CONT) INITIAL SETUP (CONT) Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Sling, Cargo (2) (Item 56, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Socket Set, Socket Wrench (Item 59, Appendix B) Socket Set, Impact (Item 58, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Bolt (6) (Item 17, Appendix F) Nut, Self-locking (20) (Item 211, Appendix F) Bolt (6) (Item 10, Appendix F) Bolt (4) (Item 7, Appendix F) Bolt (2) (Item 19, Appendix F) Bolt (6) (Item 16, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. LH Removal. (1) Remove seven self-locking nuts (1), bolts (2), and clamps (3) from frame rail (4). Discard self-locking nuts. (2) Remove two self-locking nuts (5), bolts (6), and clamps (7) from frame rail (4). Discard self-locking nuts. (3) Remove self-locking nut (8), bolt (9), and bracket (10) from frame rail (4). Discard self-locking nut. 13-193