TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 850 of 1434
TM 9-2320-366-34-2 13-23. FRONT LIFTING BRACKET REPLACEMENT (CONT) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (6) Position lower front lifting bracket support crossmember (6) on front lifting bracket (1) with four screws (7) and self-locking nut (8). (7) Tighten four self-locking nuts (8) to 117-131 lb-ft (259- 178 N·m). (8) Position four lockwashers (9) and screws (10) in crossmember (11). (9) Tighten four screws (10) to 48-58 lb-ft (65-79 N·m). WARNING Lifting beam weighs approximately 75 lbs (34 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. (10) Position lifting beam (12) in front lifting bracket (1) with two pins (13). (11) Perform step (10) on left side of front lifting bracket. 13-190