TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 841 of 1434
TM 9-2320-366-34-2 13-23. FRONT LIFTING BRACKET REPLACEMENT This task covers: a. Removal (All Models Except M1093/M1094) b. Installation (All Models Except M1093/M1094) c. Removal (M1093/M1094) d. Installation (M1093/M1094) e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Intake air cleaner removed (TM 9-2320-366-20-3). Spare tire retainer removed (TM 9-2320-366-20-3). Radiator overflow tank removed (TM 9-2320-366-20- 3). Hydraulic reservoir removed, if equipped (TM 9-2320- 366-20-5). Fuel tank removed (TM 9-2320-366-20-3). Engine oil fill tube removed (TM 9-2320-366-20-3). Transmission oil fill tube removed (all models except M1093/M1094) (TM 9-2320-366-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Sling, Cargo (2) (Item 56, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Socket Set, Impact (Item 58, Appendix B) Materials/Parts Nut, Self-locking (4) (Item 212, Appendix F) Nut, Self-locking (16) (Item 211, Appendix F) Nut, Self-locking (6) (Item 215, Appendix F) Bolt (16) (Item 16, Appendix F) Nut, Self-locking (20) (Item 211, Appendix F) Lockwasher (8) (Item 150, Appendix F) Personnel Required (3) a. Removal (All Models Except M1093/M1094). WARNING Lifting beam weighs approximately 75 lbs (34 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Left and right side of front lifting bracket is removed the same way. Right side shown. • Steps (1) through (4) require the aid of an assistant. (1) Remove two pins (1) and lifting beam (2) from front lifting bracket (3). 13-181