TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 839 of 1434
TM 9-2320-366-34-2 NOTE Both support brackets are installed the same way. One support bracket shown. (3) Position support bracket (4) on vehicle with two bolts (5) and self-locking nuts (6). (4) Tighten two self-locking nuts (6) to 120-147 lb-ft (264- 324 N·m). (5) Perform steps (3) and (4) on remaining support bracket. (6) Position eight bolts (7) and self-locking nuts (8) in rear torque arm bracket (9). (7) Tighten eight self-locking nuts (8) to 390-510 lb-ft (529- 691 N·m). (8) Position five brackets (10) on frame plate (1) with three bolts (11) and self-locking nuts (12). (9) Tighten five self-locking nuts (12) to 77-92 lb-ft (105-125 N·m). Change 1 13-179