TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 838 of 1434
TM 9-2320-366-34-2 13-178 Change 2 13-22. M1088 FRAME PLATE REPLACEMENT (WITHOUT FRAME RAIL KIT) (CONT) d. RH Installation. (1) Position frame plate (1) on vehicle with eight bolts (2) and self-locking nuts (3). (2) Tighten eight self-locking nuts (3) to 77-92 lb-ft (105-125 N•m). (2.1) Cut two plastic edges (3.1) to approximately 9 in. (23 cm). (2.2) Apply adhesive to plastic edge (3.1). (2.3) Install plastic edge (3.1) on support bracket (4). WARNING WARNING Frame plate weighs approximately 90 lbs (41 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in damage to equipment or injury to personnel. NOTE Steps (1) through (9) require the aid of an assistant. Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.