TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 831 of 1434
TM 9-2320-366-34-2 NOTE Both support brackets are removed the same way. One support bracket shown. (5) Remove two self-locking nuts (17), support bracket (18), and two bolts (19) from vehicle. Discard self-locking nuts. (5.1) Remove plastic edge (19.1) from support bracket (18). Discard plastic edge. (6) Perform steps (5) and (5.1) on remaining support bracket. WARNING Frame plate weighs approximately 90 lbs (41 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in damage to equipment or injury to personnel. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (7) Remove ten collars (20), bolts (21), and frame plate (4) from vehicle. Discard collars and bolts. Change 1 13-173