TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 815 of 1434
TM 9-2320-366-34-2 13-21. M1089 FRAME PLATE REPLACEMENT This task covers: a. LH Removal b. LH Installation c. RH Removal d. RH Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Catwalks removed (TM 9-2320-366-20-4). Tool box support structure removed (para 15-12). Material Handling Crane (MHC) removed (para 16-32). Crane brackets removed (para 13-8). 30K winch assemblies removed (para 16-63). Underlift and stiffleg assembly removed (para 16-68). Eight-bank valve assembly removed (RH frame rail) (para 16-59). Upper main valve assembly removed (RH frame rail) (para 16-83). Lower valve assembly removed (RH frame rail) (para 16-84). Rear axle bogie shaft removed (para 10-4). Rear torque rods removed (para 14-5). Resilient mount and mechanical stops removed (TM 9- 2320-366-20-4). Intermediate axle shock absorber brackets removed (para 14-8). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Socket Set, Socket Wrench (Item 59, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Socket Set, Impact (Item 58, Appendix B) Sling, Cargo (2) (Item 56, Appendix B) Materials/Parts Nut, Self-locking (Item 202, Appendix F) (LH side) Nut, Self-locking (2) (Item 202, Appendix F) (RH side) Nut, Self-locking (Item 173, Appendix F) (RH side) Lockwasher (Item 166, Appendix F) (RH side) Nut, Self-locking (8) (Item 212, Appendix F) Bolt (24) (Item 2, Appendix F) Nut, Self-locking (24) (Item 204, Appendix F) Bolt (2) (Item 9, Appendix F) Bolt (21) (Item 7, Appendix F) Bolt (6) (Item 17, Appendix F) Nut, Self-locking (29) (Item 211, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. 13-157