TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 801 of 1434
TM 9-2320-366-34-2 (7) Remove self-locking nut (21), and bolt (22) from frame plate (4). Discard self-locking nut. (8) Remove 13 collars (23), bolts (24), and frame plate (4) from vehicle. Discard collars and bolts. d. RH Installation. NOTE Steps (1) through (11) require the aid of an assistant. (1) Position frame plate (1) on vehicle with 13 bolts (2) and self-locking nuts (3). (2) Position bolt (4) and self-locking nut (5) in frame plate (1). (3) Tighten 13 self-locking nuts (3) and self-locking nut (5) to 210-225 lb-ft (285-305 N·m). (4) Position three bolts (6) and self-locking nuts (7) in frame plate (1). (5) Tighten three self-locking nuts (7) to 210-225 lb-ft (285- 305 N·m). 13-143