TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 793 of 1434
TM 9-2320-366-34-2 (9) Position rear torque arm bracket (9) on frame plate (1) with eight bolts (10) and self-locking nuts (11). (10) Tighten eight self-locking nuts (11) to 390-510 lb-ft (529- 691 N·m). (11) Position two clamps (12) on frame plate (1) with two bolts (13) and self-locking nuts (14). (12) Tighten two self-locking nuts (14) to 84-108 lb-in. (10-12 N·m). e. Follow-On Maintenance. (1) Install 15K Self-Recovery Winch (SRW) cable pulleys, if equipped (TM 9-2320-366-20-5). (2) Install resilient mount and mechanical stops (TM 9-2320- 366-20-4). (3) Install rear torque rods (para 14-5). (4) Install rear axle bogie shaft (para 10-4). End of Task. 13-135