TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 785 of 1434
TM 9-2320-366-34-2 WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (9) Apply sealing compound to threads of two bolts (9). NOTE Install bolts in positions noted during removal. (10) Position maintenance leg bracket (10) on frame plate (1) with two washers (11), bolts (9), and nuts (12). (11) Tighten two nuts (12) to 18-22 lb-ft (24-29 N·m). (12) Position rear torque arm bracket (13) on frame plate (1) with eight bolts (14) and self-locking nuts (15). (13) Tighten eight self-locking nuts (15) to 390-510 lb-ft (529- 691 N·m). (14) Position screw (16) in frame plate (1) with lockwasher (17) and self-locking nut (18). (15) Tighten self-locking nut (18) to 84-108 lb-in. (10-12 N·m). (16) Position clamp (19) and terminal lug TL92 (20) on screw (16) with self-locking nut (21). (17) Tighten self-locking nut (21) to 84-108 lb-in. (10-12 N·m). 13-127