TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 779 of 1434
TM 9-2320-366-34-2 CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (7) Remove 17 collars (23), bolts (24), and frame plate (4) from vehicle. Discard collars and bolts. b. LH Installation. NOTE Steps (1) through (11) requires the aid of an assistant. (1) Position frame plate (1) on vehicle with 17 bolts (2) and self-locking nuts (3). (2) Tighten 17 self-locking nuts (3) to 77-92 lb-ft (105-125 N·m). NOTE Install bolts in positions noted during removal. (3) Position eight bolts (4) and self-locking nuts (5) in frame plate (1). (4) Tighten eight self-locking nuts (4) to 210-225 lb-ft (285- 305 N·m). (5) Position three brackets (6) on frame plate (1) with three bolts (7) and self-locking nuts (8). (6) Tighten three self-locking nuts (8) to 77-92 lb-ft (105-125 N·m). 13-121