TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 76 of 1434
TM 9-2320-366-34-2 3-3. ENGINE ASSEMBLY REPLACEMENT (CONT) a. Removal. (1) Remove two self-locking nuts (1), screws (2), and power steering reservoir bracket (3) from bracket (4). Discard self-locking nuts. NOTE Tag hydraulic hoses and connection points prior to disconnecting. (2) Disconnect power steering pressure hose (5) from 90- degree fitting (6). (3) Loosen clamp (7) on power steering return hose (8). (4) Disconnect power steering return hose (8) from tube (9). (5) Deleted. (6) Deleted. (7) Deleted. (8) Deleted. (9) Deleted. (10) Deleted. (11) Deleted. (12) Remove adhesive, nut (10), terminal lugs TL55 (11), and TL12 (12) from starter solenoid (13). (13) Position nut (10) on starter solenoid (13). (14) Remove adhesive, nut (14), and terminal lug TL26 (15) from starter solenoid (13). (15) Position nut (14) on starter solenoid (13). 3-16 Change 1