TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 740 of 1434
TM 9-2320-366-34-2 13-13. M1094 SUSPENSION BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Dump body raised (TM 9-2320-366-10-1). Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Tools and Special Tools (Cont) Wrench Set, Socket (Item 84, Appendix B) Materials/Parts Nut, Self-locking (8) (Item 211, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE • Left and right side suspension brackets are removed the same way. Left side shown. • Step (1) requires the aid of an assistant. (1) Remove eight self-locking nuts (1), bolts (2), and suspension bracket (3) from frame rail (4). Discard self-locking nuts. 13-82