TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 738 of 1434
TM 9-2320-366-34-2 13-12. M1094 EXTRACTION TUBE AND EXTENSION BRACKET REPLACEMENT (CONT) (8) Remove eight nuts (22), lockwashers (23), bolts (24), washers (25), and extraction block (16) from extraction tube (4). Discard lockwashers. b. Installation. NOTE Left and right side extraction tubes are installed the same way. Left side shown. (1) Position extraction tube (1) in vise. (2) Position extraction block (2) in extraction tube (1) with eight washers (3), bolts (4), lockwashers (5) and nuts (6). (3) Tighten eight nuts (6) to 210-225 lb-ft (285-305 N·m). (4) Position mounting plate (7) on extraction tube (1) with two washers (8), bolts (9), lockwashers (10), and nuts (11). (5) Tighten two nuts (11) to 33-45 lb-ft (45-61 N·m). (6) Install washer (12) and tie-down ring (13) in extraction block (2). (7) Remove extraction tube (1) from vise. 13-80