TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 735 of 1434
TM 9-2320-366-34-2 NOTE Perform steps (4) and (5) on vehicle serial numbers 1399 through 2987. (4) Position three washers (8), bolt (9), and self-locking nut (10) in rear axle shock absorber (11). (5) Tighten self-locking nut (10) to 195-239 lb-ft (264-324 N·m). NOTE Perform steps (6) and (7) on vehicle serial numbers 0001 through 1398 and 2988 and higher serial numbers. (6) Position washer (12), bolt (9), and self-locking nut (10) in rear axle shock absorber (11). (7) Tighten self-locking nut (10) to 195-239 lb-ft (264-324 N·m). (8) Position valve control panel (13) on structural support (1) with two washers (14), bolts (15), washers (16), and self- locking nuts (17). (9) Tighten two self-locking nuts (17) to 14-18 lb-ft (20-24 N·m). (10) Perform steps (9) and (10) on left side of structural support. e. Follow-On Maintenance. (1) Install rear stabilizer brackets (M1090/M1094) (para 14- 10). (2) Install rear crossmember (para 13-7). End of Task. 13-77