TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 734 of 1434
TM 9-2320-366-34-2 13-11. M1083/M1093/M1090/M1094 STRUCTURAL SUPPORT REPLACEMENT (CONT) CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (6) Remove collar (12) and bolt (13) from rear axle shock absorber rear bracket (14). Discard collar and bolt. (7) Remove collar (15), bolt (16), and rear axle shock absorber rear bracket (14) from frame rail (17). Discard collar and bolt. (8) Perform steps (3) through (7) on right side of structural support. (9) Remove structural support (6) from vehicle. d. M1090/M1094 Installation. NOTE • Left and right side of structural support is installed the same way. Right side shown. • Steps (1) through (10) require the aid of an assistant. (1) Position structural support (1) and rear axle shock absorber rear bracket (2) on frame rail (3) with bolt (4) and self-locking nut (5). (2) Position bolt (6) and self-locking nut (7) in rear axle shock absorber rear bracket (2). (3) Tighten self-locking nuts (5 and 7) to 210-225 lb-ft (285- 305 N·m). 13-76