TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 733 of 1434
TM 9-2320-366-34-2 c. M1090/M1094 Removal. NOTE • Left and right side of valve control panel is removed the same way. Right side shown. • Remove plastic cable ties as required. • Steps (1) through (9) require the aid of an assistant. (1) Remove three self-locking nuts (1), washers (2), bolts (3), and washers (4) from valve control panel (5). Discard self-locking nuts. (2) Perform step (1) on left side of valve control panel (5). (3) Position valve control panel (5) for access to structural support (6). NOTE • Left and right side of structural support is removed the same way. Right side shown. • Perform step (4) on vehicle serial numbers 0001 through 1398 and 2988 and higher serial numbers. (4) Remove self-locking nut (7), bolt (8), and washer (9) from rear axle shock absorber (10). Discard self-locking nut. NOTE Perform step (5) on vehicle serial numbers 1399 through 2987. (5) Remove self-locking nut (7), bolt (8), and three washers (11) from rear axle shock absorber (10). Discard self- locking nut. 13-75