TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 732 of 1434

TM 9-2320-366-34-2 13-11. M1083/M1093/M1090/M1094 STRUCTURAL SUPPORT REPLACEMENT (CONT) NOTE Perform steps (11) and (12) on vehicle serial numbers 1399 through 2987. (11) Position three washers (17), bolt (18), and self-locking nut (19) in rear axle shock absorber (20). (12) Tighten self-locking nut (19) to 195-239 lb-ft (264-324 N·m). NOTE Perform steps (13) and (14) on vehicle serial numbers 0001 through 1398 and 2988 and higher serial numbers. (13) Position washer (21), bolt (18), and self-locking nut (19) in rear axle shock absorber (20). (14) Tighten self-locking nut (19) to 195-239 lb-ft (264-324 N·m). NOTE Install plastic cable ties as required. (15) Position valve control panel (22) on structural support (1) with three washers (23), bolts (24), washers (25), and self-locking nuts (26). (16) Tighten three self-locking nuts (26) to 14-18 lb-ft (20-24 N·m). (17) Perform steps (1) through (16) on left side of structural support (1). 13-74