TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 729 of 1434
TM 9-2320-366-34-2 NOTE • Left and right side of structural support is removed the same way. Right side shown. • Perform step (4) on vehicle serial numbers 0001 through 1398 and 2988 and higher serial numbers. (4) Remove self-locking nut (7), bolt (8), and washer (9) from rear axle shock absorber (10). Discard self-locking nut. NOTE Perform step (5) on vehicle serial numbers 1399 through 2987. (5) Remove self-locking nut (7), bolt (8), and three washers (11) from rear axle shock absorber (10). Discard self- locking nut. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (6) Remove collar (12) and bolt (13) from rear axle shock absorber front bracket (14). Discard collar and bolt. (7) Remove collar (15), bolt (16), rear axle shock absorber front bracket (14), two washers (16.1), and bracket (17) from frame rail (18). Change 1 13-71