TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 726 of 1434
TM 9-2320-366-34-2 13-10. M1093/M1094 ANGLE BRACKET REPLACEMENT (CONT) b. LH Installation. NOTE Steps (1) and (2) require the aid of an assistant. (1) Position angle bracket (1) on frame rail (2) with six bolts (3) and self-locking nuts (4). (2) Tighten six self-locking nuts (4) to 210-225 lb-ft (285-305 Nยทm). c. RH Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply may result in seizing of collar to bolt. NOTE Steps (1) requires the aid of an assistant. Remove four collars (1), bolts (2), and angle bracket (3) from frame rail (4). Discard collars and bolts. 13-68