TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 725 of 1434
TM 9-2320-366-34-2 13-10. M1093/M1094 ANGLE BRACKET REPLACEMENT This task covers: a. LH Removal b. LH Installation c. RH Removal d. RH Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Air dryer removed (LH side) (TM 9-2320-366-20-5). Muffler and heat shield removed (RH side) (TM 9 2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Tools and Special Tools (Cont) Socket Set, Impact (Item 58, Appendix B) Materials/Parts Bolt (6) (Item 7, Appendix F) (LH side) Nut, Self-locking (6) (Item 211, Appendix F) (LH side) Bolt (4) (Item 7, Appendix F) RH side) Nut, Self-locking (4) (Item 211, Appendix F) (RH side) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. LH Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE Step (1) requires the aid of an assistant. Remove six collars (1), bolts (2), and angle bracket (3) from frame rail (4). Discard collars and bolts. 13-67