TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 722 of 1434
TM 9-2320-366-34-2 13-9. M1084/M1085/M1086/M1088 REAR BUMPER REPLACEMENT (CONT) NOTE Perform steps (5) through (7) on RH side. (5) Remove five collars (13), and bolts (14) from rear bumper (3). Discard collars and bolts. (6) Remove self-locking nut (15), tie-down ring (16), and bracket (17) from rear bumper (3). Discard self-locking nut. (7) Remove collar (18), bolt (19), and spacer plate (20) from rear bumper (3). Discard collar and bolt. (8) Remove two collars (21), bolts (22), and rear bumper (3) from vehicle. Discard collars and bolts. (9) Remove four screws (23) and two reflectors (24) from rear bumper (3). f. M1088 Installation. (1) Install two reflectors (1) on rear bumper (2) with four screws (3). NOTE Steps (2) through (14) require the aid of an assistant. (2) Position rear bumper (2) on vehicle with two bolts (4) and self-locking nuts (5). (3) Tighten two self-locking nuts (5) to 210-225 lb-ft (285- 305 Nยทm). 13-64