TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 720 of 1434
TM 9-2320-366-34-2 13-9. M1084/M1085/M1086/M1088 REAR BUMPER REPLACEMENT (CONT) d. M1085 Installation. NOTE Steps (1) through (5) require the aid of an assistant. (1) Position rear bumper (1) on vehicle with two bolts (2) and self-locking nuts (3). (2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). NOTE Left and right side of rear bumper is installed the same way. Left side shown. (3) Position three bolts (4) and self-locking nuts (5) in rear bumper (1). (4) Position three bolts (6) and self-locking nuts (7) in rear bumper (1). (5) Tighten three self-locking nuts (5 and 7) to 210-225 lb-ft (285-305 N·m). (6) Perform steps (3) through (5) on right side of rear bumper. 13-62