TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 718 of 1434
TM 9-2320-366-34-2 13-9. M1084/M1085/M1086/M1088 REAR BUMPER REPLACEMENT (CONT) b. M1084/M1086 Installation. NOTE Steps (1) through (6) require the aid of an assistant. (1) Position rear bumper (1) on vehicle with two bolts (2) and self-locking nuts (3). (2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). NOTE Left and right side of rear bumper is installed the same way. Left side shown. (3) Position three bolts (4) and self-locking nuts (5) in rear bumper (1). (4) Tighten three self-locking nuts (5) to 210-225 lb-ft (285- 305 N·m). (5) Position three bolts (6) and self-locking nuts (7) in rear bumper (1). (6) Tighten three self-locking nuts (7) to 210-225 lb-ft (285- 305 N·m). (7) Perform steps (3) through (6) on right side of rear bumper. 13-60