TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 710 of 1434
TM 9-2320-366-34-2 13-8. M1084/M1086/M1089 CRANE BRACKETS REPLACEMENT (CONT) c. M1084/M1086 Rear Bracket Removal. NOTE • Left and right side rear bracket is removed the same way. Left side shown. • Steps (1) and (2) require the aid of an assistant. (1) Remove nut (1), two washers (2), shim(s) (3), plate (4), and bolt (5) from rear bracket (6). CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (2) Remove six collars (7), bolts (8), and rear bracket (6) from frame rail (9). Discard collars and bolts. d. M1084/M1086 Rear Bracket Installation. NOTE • Left and right side rear bracket is installed the same way. Left side shown. • Steps (1) through (4) require the aid of an assistant. (1) Position rear bracket (1) on frame rail (2) with six bolts (3) and self-locking nuts (4). (2) Tighten six self-locking nuts (4) to 210-225 lb-ft (285-305 N·m). (3) Position bolt (5), shim(s) (6), two washers (7), plate (8), and nut (9) in rear bracket (1). (4) Tighten nut (9) to 780-950 lb-ft (1058-1288 N·m). 13-52