TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 709 of 1434
TM 9-2320-366-34-2 a. M1084/M1086 Front Bracket Removal. NOTE • Left and right side front bracket is removed the same way. Left side shown. • Steps (1) and (2) require the aid of an assistant. (1) Remove nut (1), two washers (2), shim(s) (3), plate (4), and bolt (5) from front bracket (6). CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (2) Remove four collars (7), bolts (8), and front bracket (6) from frame rail (9). Discard collars and bolts. b. M1084/M1086 Front Bracket Installation. NOTE • Left and right side front bracket is installed the same way. Left side shown. • Steps (1) through (4) require the aid of an assistant. (1) Position front bracket (1) on frame rail (2) with four bolts (3) and self-locking nuts (4). (2) Tighten four self-locking nuts (4) to 210-225 lb-ft (285- 305 N·m). (3) Position bolt (5), shim(s) (6), two washers (7), plate (8), and nut (9) in front bracket (1). (4) Tighten nut (9) to 780-950 lb-ft (1058-1288 N·m). 13-51