TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 705 of 1434
TM 9-2320-366-34-2 CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Left and right side of rear crossmember is removed the same way. Left side shown. • Steps (5) through (8) require the aid of an assistant. (5) Remove two collars (9) and bolts (10) from rear crossmember (5). Discard collars and bolts. (6) Remove five collars (11) and bolts (12) from rear crossmember (5). Discard collars and bolts. (7) Perform steps (5) and (6) on right side of rear crossmember. (8) Remove rear crossmember (5) from vehicle. j. M1085 Installation. NOTE • Left and right side of rear crossmember is installed the same way. Left side shown. • Steps (1) through (3) require the aid of an assistant. (1) Position rear crossmember (1) on vehicle with five bolts (2) and self-locking nuts (3). (2) Tighten five self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). 13-47