TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 699 of 1434
TM 9-2320-366-34-2 NOTE Left and right side of rear crossmember is installed the same way. Left side shown. (3) Position two bolts (4) and self-locking nuts (5) in rear crossmember (1). (4) Tighten two self-locking nuts (5) to 192-236 lb-ft (260- 290 N·m). (5) Position three bolts (6) and self-locking nuts (7) in rear crossmember (1). (6) Tighten three self-locking nuts (7) to 210-225 lb-ft (285- 305 N·m). (7) Position bolt (8) and self-locking nut (9) in rear stabilizer bracket (10). (8) Tighten self-locking nut (9) to 77-92 lb-ft (105-125 N·m). (9) Position two bolts (11) and self-locking nuts (12) in rear crossmember (1). (10) Tighten two self-locking nuts (12) to 210-225 lb-ft (285- 305 N·m). 13-41