TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 698 of 1434
TM 9-2320-366-34-2 13-7. REAR CROSSMEMBER REPLACEMENT (CONT) CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (9) Remove three collars (20) and bolts (21) from rear crossmember (5). Discard collars and bolts. (10) Remove two self-locking nuts (22) and bolts (23) from rear crossmember (5). Discard self-locking nuts. (11) Perform steps (5) through (10) on right side of rear crossmember. (12) Remove two collars (24), bolts (25) and rear crossmember (5) from vehicle. Discard collars and bolts. f. M1083/M1093 Installation. NOTE Steps (1) through (6) require the aid of an assistant. (1) Position rear crossmember (1) on vehicle with two bolts (2) and self-locking nuts (3). (2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). 13-40