TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 692 of 1434
TM 9-2320-366-34-2 13-7. REAR CROSSMEMBER REPLACEMENT (CONT) (6) Remove five self-locking nuts (11) and bolts (12) from rear crossmember (5). Discard self-locking nuts. (7) Perform steps (5) and (6) on right side of rear crossmember. (8) Remove rear crossmember (5) from vehicle. b. M1084/M1086 Installation. NOTE • Left and right side of rear crossmember is installed the same way. Left side shown. • Steps (1) through (4) require the aid of an assistant. (1) Position rear crossmember (1) on vehicle with five bolts (2) and self-locking nuts (3). (2) Tighten five self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). (3) Position two bolts (4) and self-locking nuts (5) in rear crossmember (1). (4) Tighten two self-locking nuts (5) to 210-225 lb-ft (285- 305 N·m). (5) Perform steps (1) through (4) on right side of rear crossmember. 13-34