TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 691 of 1434
TM 9-2320-366-34-2 WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. M1084/M1086 Removal. (1) Remove cotter pin (1) from nut (2). Discard cotter pin. (2) Remove nut (2) and washer (3) from pintle hook (4). (3) Remove pintle hook (4) from rear crossmember (5). (4) Remove four self-locking nuts (6), screws (7), and support (8) from rear crossmember (5). Discard self- locking nuts. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Left and right side of rear crossmember is removed the same way. Left side shown. • Steps (5) through (8) require the aid of an assistant. (5) Remove two collars (9) and bolts (10) from rear crossmember (5). Discard collars and bolts. 13-33