TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 688 of 1434
TM 9-2320-366-34-2 13-6. REAR TENSION BEAM AND TAILLIGHT MOUNTING BRACKET REPLACEMENT (CONT) l. M1094 Installation. NOTE • Left and right side of rear tension beam is installed the same. Left side shown. • Steps (1) through (6) require the aid of an assistant. (1) Position rear tension beam (1) and taillight mounting bracket (2) on vehicle with three bolts (3) and self- locking nuts (4). (2) Tighten three self-locking nuts (4) to 210-225 lb-ft (285- 305 N·m). (3) Position rear spreader bar bracket (5) on rear tension beam (1) with two bolts (6) and self-locking nuts (7). (4) Tighten two self-locking nuts (7) to 210-225 lb-ft (285- 305 N·m). (5) Position two bolts (8) and self-locking nuts (9) in rear tension beam (1). (6) Tighten two self-locking nuts (9) to 210-225 lb-ft (285- 305 N·m). (7) Install shackle (10) on rear tension beam (1) with pin (11). (8) Perform steps (1) through (7) on right side of rear tension beam. 13-30