TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 684 of 1434
TM 9-2320-366-34-2 13-6. REAR TENSION BEAM AND TAILLIGHT MOUNTING BRACKET REPLACEMENT (CONT) h. M1085 Installation. NOTE • Left and right side of rear tension beam is installed the same way. Left side shown. • Steps (1) through (5) require the aid of an assistant. (1) Position rear tension beam (1) and taillight mounting bracket (2) on vehicle with four bolts (3) and self-locking nuts (4). (2) Tighten four self-locking nuts (4) to 210-225 lb-ft (285- 305 N·m). (3) Position two bolts (5) and self-locking nuts (6) in rear tension beam (1). (4) Tighten two self-locking nuts (6) to 210-225 lb-ft (285- 305 N·m). (5) Install shackle (7) on rear tension beam (1) with pin (8). (6) Perform steps (1) through (5) on right side of rear tension beam. 13-26