TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 680 of 1434
TM 9-2320-366-34-2 13-6. REAR TENSION BEAM AND TAILLIGHT MOUNTING BRACKET REPLACEMENT (CONT) c. M1093 Removal. NOTE • Left and right side of rear tension beam is removed the same way. Left side shown. • Steps (1) through (4) require the aid of an assistant. (1) Remove pin (1) and shackle (2) from rear tension beam (3). CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (2) Remove collar (4) and bolt (5) from rear tension beam (3). Discard collar and bolt (3) Remove two self-locking nuts (6), bolts (7), and rear spreader bar bracket (8) from rear tension beam (3). Discard self-locking nuts. (4) Remove three collars (9), bolts (10), and taillight mounting bracket (11) from rear tension beam (3). Discard collars and bolts. (5) Perform steps (1) through (4) on right side of rear tension beam. (6) Remove rear tension beam (3) from vehicle. 13-22