TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 68 of 1434
TM 9-2320-366-34-2 3-2. DRESSED ENGINE UNPACKING/PACKING (CONT) (48) Position turbocharger inlet coupling (84) on turbocharger (32) with clamp (83). CAUTION A gap of approximately 1/2 in. (1.3 cm) is required between turbocharger inlet coupling and alternator. Failure to comply may result in damage to equipment. (49) Tighten clamp (83) to 90-100 lb-in. (10-11 N·m). b. Packing. (1) Loosen clamp (1) on turbocharger inlet coupling (2). (2) Remove turbocharger inlet coupling (2) from turbocharger (3). 3-8