TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 668 of 1434
TM 9-2320-366-34-2 13-5. M1089 CRANE BOOM REST AND CYLINDER BRACKET REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions M1089 Hydraulic tank removed (TM 9-2320-366-20- 5) Catwalk ladder removed (TM 9-2320-366-20-4) RH catwalk removed (TM 9-2320-366-20-4) Placards removed (TM 9-2320-366-20-2) Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Cap and Plug Set (TM 9-2320-366-20) Pan, Drain (Item 43, Appendix B) Wrench Set, Crowfoot, Racheting (TM 9-2320-366- 20) Socket, Set, Impact (Item 58, Appendix B) Socket Set, Socket Wrench (Item 59, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Rag, Wiping (Item 60, Appendix C) Nut, Self-locking (8) (Item 181, Appendix F) Nut, Self-locking (2) (Item 199, Appendix F) Nut, Self-locking (6) (Item 179, Appendix F) Nut, Self-locking (6) (Item 211, Appendix F) Bolt (6) (Item 8, Appendix F) Nut, Self-locking (2) (Item 191, Appendix F) Nut, Self-locking (8) (Item 201, Appendix F) Personnel Required (3) WARNING Use care when moving oxygen/acetylene bottles. Oxygen/acetylene bottles can act as projectiles if punctured and discharge explosive gases. Failure to comply may result in serious injury or death to personnel or damage to equipment. a. Removal. (1) Remove two self-locking nuts (1) and washers (2) from straps (3). Discard self-locking nuts. NOTE Steps (2) through (7) require the aid of two assistants. (2) Remove acetylene bottle (4) from vehicle. 13-10