TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 666 of 1434
TM 9-2320-366-34-2 13-4. M1093 PARACHUTE SUSPENSION ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance. INITIAL SETUP Equipment Conditions Parachute slide assemblies removed (TM 9-2320- 366-20-4). Cargo bed removed (para 15-9). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Tools and Special Tools (Cont) Sling, Cargo (Item 56, Appendix B) Materials/Parts Nut, Self-locking (28) (Item 212, Appendix F) Personnel Required (2) a. Removal. NOTE Steps (1) through (4) require the aid of an assistant. (1) Remove 14 self-locking nuts (1) and bolts (2) from parachute suspension assembly (3). Discard self-locking nuts. (2) Perform step (1) on left side of parachute suspension assembly. WARNING Parachute suspension assembly weighs approximately 250 lbs (113 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in damage to equipment or injury to personnel. (3) Remove lanyard (4) from parachute suspension assembly (3). (4) Remove parachute suspension assembly (3) from vehicle. 13-8