TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 664 of 1434
TM 9-2320-366-34-2 13-3. FRONT ANGLE BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Resilient mount removed (TM 9-2320-366-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Tools and Special Tools Adapter, Socket Wrench (Item 4, Appendix B) Socket Set, Impact (Item 58, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Materials/Parts Bolt (2) (Item 2, Appendix F) Nut, Self-Locking (2) (Item 204, Appendix F) WARNING Wear appropriate eye protection when working under vehicle. Falling debris may cause eye injury. Failure to comply may result in injury to personnel. a. Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE Left and right side front angle brackets are removed the same way. Left side shown. Remove two collars (1), bolts (2), and front angle bracket (3) from frame (4). Discard bolts and collars. 13-6