TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 661 of 1434
TM 9-2320-366-34-2 Section II. MAINTENANCE PROCEDURES 13-2. M1093/M1094 SIDELOAD BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Wrench, Torque, 0-150 lb-ft (Item 90, Appendix B) Crowfoot Attachment, Socket Wrench (TM 9-2320- 366-20) Tools and Special Tools (Cont) Socket Set, Impact (Item 58, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Materials/Parts Nut, Self-locking (Item 182, Appendix F) Nut, Self-locking (6) (Item 211, Appendix F) Bolt (5) (Item 7, Appendix F) Personnel Required (2) a. Removal. NOTE • Left and right side sideload brackets are removed the same way. Right side shown. • Steps (1) through (4) require the aid of an assistant. (1) Remove self-locking nut (1) and bolt (2) from sideload bracket (3). Discard self-locking nut. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (2) Remove three collars (4) and bolts (5) from sideload bracket (3). Discard collars and bolts. 13-3